Saturday, 1 August 2009

How to Get Rid of Toilet Stains

Nothing is quite as nice as a clean, white, and sparkly toilet, as anyone who has ever used a public restroom can attest to. But what happens when that gleaming white porcelain gets stained, or worse, has an unsightly ring? Face it, everyone has had a toilet that was embarrassing because it was stained, scratched or unsightly. Save yourself the embarrassment and the frustration of a stained toilet by using some simple techniques to keep your toilet clean, attractive, and stain-free.

Whatever chemicals you use, please be sure to follow directions thoroughly before using any strong chemicals and follow them exactly. Most importantly, never mix chemicals together or you could unwittingly create a bomb in your toilet and hurt yourself. Lastly, make sure you have adequate ventilation, eye protection, and skin protection.

The tips below will help to get your commode in tip-top toilet shape!

Basic Toilet Stain Removal

While cleaning the bathroom may never be your favorite household chore, it is one of the most important and toilets, in particular, can cause a great deal of embarrassment if they are not visions of gleaming white porcelain. But with a few simple precautions and effective cleaning methods, you can have a gleaming bathroom you can be proud of.

* The first thing to do is to empty as much water from the bowl as possible; not only does this enable you to work directly on stains, it also means that there is less water to dilute the cleaning agents you are using.

You can lower the water level by first turning off the water source and then either pouring a large bucket of water into the bowl as a sort of "manual flush" or just flushing the toilet, in both cases driving as much water down the pipes as possible.

* Next, give the inside of the bowl a general clean, using liberal amounts of cleaning agent or disinfectant and a bowl brush. If the toilet is still stained after cleaning, use some stronger cleaning agents or stain removers to tackle the marks.

Whatever chemicals you use, remember to respect the directions given and follow them exactly; in particular; never mix chemicals as this can be extremely hazardous. Make sure there is sufficient ventilation while you are working and ideally, wear eye and skin protection.

* In addition, always use an all-plastic scrubbing brush; avoid the toilet brushes with metal wires as these can scratch and permanently damage a toilet. Pumice stones have sometimes been recommended for tackling hard water or mineral deposits and while they can be very effective (although physically, they're hard work!), there is a risk they could scratch the porcelain, so be careful if you decide to use this method.

Toilet Stain Removal Agents

There are alternative methods using chemicals that run less risk of scratching the porcelain.

* Vinegar is a great all-purpose stain remover and cleaning agent. Vinegar works well on toilet stains, particularly hard water deposits or lime scale. Simply pour a large amount into the toilet bowl and leave it overnight, then clean again as usual in the morning, flushing thoroughly.

* Borrowed from your laundry cupboard, bleach is stronger than vinegar and so works on tougher stains and rings. Again, simply add to the toilet bowl (half a cup should be sufficient) and then leave for as long as possible before cleaning and flushing away.

Tag : toilet,toilet stains,toilet training,toilet repair,

No comments:

Post a Comment